Samsung Galaxy SM-J510GN Successfully Code Read Unlocked

 Samsung Galaxy SM-J510GN Successfully Code Read Unlocked

UNLOCK INSTRUCTIONS:
 
   Unlocking with original MSL code:
  1. Phone must be powered on.
  2. Run dialer and type *#0*# (service mode will apear).
  3. Connect the phone to UART cable, choose correct COM port in port settings.
  4. Press 'Unlock' button.
  5. Paste MSL code in new opened window and press 'OK'.
 
    Reading codes using sever:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
    (Login and password will be saved as default after first input and can be changed in settings.)
 
    To reset Google account activation lock:
  1. ADB must be activated in any way (you can flash sBoot from combination firmware,
     make sure, that you are not upgrade sBoot).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Select device in ADB settings.
  4. Press 'Reset FRP' and follow the instructions in program.
  5. When process done, press 'Back' on phone and perform factory reset from phone settings.
   
   To reset Google account activation or Samsung reactivation lock:
  1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
  4. After phone reboot, go to settings and perform factory reset.

Operation: Read Codes via Server
Selected model: SM-J510GN
Selected port: COM3 USB Serial Port
Software version: 28.7.2

Checking Login and Password... OK
Ballance: 50 crd.
Waiting ADB device... OK
Reading phone info...
Model: SM-J510GN
Android version: 6.0.1
Product code: SM-J510GZWUXME
Phone version: J510GNDXU2AQE1
PDA version: J510GNDXU2AQE2
CSC version: J510GNOLB2AQE1
CSC country code: MALAYSIA
CSC sales code: XME
HW version: MP 0.300
Phone SN: RF8H80QBYEX
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2017-05-01
RF cal date: 2016.08.07
IMEI:
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... error ()

Done with Samsung Tool PRO v.28.7.2
Searching server... OK
Waiting for server answer... OK
Freeze code: 50706147
NET lock: 40831642

SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.28.7.2

No comments:

Post a Comment