Samsnug Galaxy SM-J510MN Network Unlock Code read with Z3X Box Successfully


  UNLOCK INSTRUCTIONS:
    Unlocking with original MSL code:
    Warning! Knox warranty must be active (0x00)!
    If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
  1. Phone must be powered on.
  2. Run dialer and type *#0*# (service mode will appear).
  3. Connect the phone to UART cable, choose correct COM port in port settings.
  4. Press 'Unlock' button.
  5. Paste MSL code in new opened window and press 'OK'.

    Reading codes using sever:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)

    To reset Google account activation lock:
  1. ADB must be activated in any way (you can flash sBoot from combination firmware,
     make sure, that you are not upgrade sBoot).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Select device in ADB settings.
  4. Press 'Reset FRP' and follow the instructions in program.
  5. When process done, press 'Back' on phone and perform factory reset from phone settings.
 
   To reset Google account activation or Samsung reactivation lock:
  1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
  4. After phone reboot, go to settings and perform factory reset.

Operation: Read Codes via Server
Selected model: SM-J510MN
Selected port: COM106 SAMSUNG Mobile USB Serial Port
Software version: 36.8

Checking Login and Password... OK
Ballance: 10 crd.
You have 10 credit(s) left. This operation takes 5 credits.Continue?  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J510MN
Android version: 7.1.1
PDA version: J510MNUBU2BRB1
CSC version: J510MNUUB2BRB1
Phone version: J510MNUBU2BQK6
Product code: SM-J510MZKNTTT
CSC country code: TRINIDAD AND TOBAGO
CSC sales code: TTT
Phone SN: RV8J*****
IMEI: 359459079*********
HW version: MP 0.300
RF cal date: 2017.09.21
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2018-01-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM4 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 49538392
NET lock: 29190393
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.36.8

No comments:

Post a Comment