SM-G928T Successfully Unlocked with Z3x Box

  UNLOCK INSTRUCTIONS:
    To unlock NEW security type:
    Phone must be rooted!
  If the software can't root the phone automatically,
  then you must root your device manually.
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock' button and select 'New Unlock' for direct unlock.
 
    To unlock OLD security type:
  1. Power on the phone.
  2. Connect the phone to PC with USB cable.
  3. Check Samsung modem in device manager, install drivers if needed.
  4. Press 'Unlock' button and select 'Unlock' for direct unlock.
 
    To read security codes (all security types):
  1. Power on the phone.
  2. Connect the phone to PC with USB cable.
  3. Check Samsung modem in device manager, install drivers if needed.
  4. Press 'Read codes' button to read security codes.
 
    To read security codes via diagnostic port:
  1. Power on the phone.
  2. Type *#0808# and select 'DM+MODEM+ADB'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Press 'Read Codes DIAG' button to read security codes.
 
    To read security codes using sever:
    Knox warranty does not matter.
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)
 
    To reset Google account activation lock:
  1. ADB must be activated in any way (you can flash sBoot from combination firmware,
     make sure, that you are not upgrade sBoot).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Select device in ADB settings.
  4. Press 'Reset FRP' and follow the instructions in program.
  5. When process done, press 'Back' on phone and perform factory reset from phone settings.
   
   To reset Google account activation or Samsung reactivation lock:
  1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
  4. After phone reboot, go to settings and perform factory reset.
 
    To reset Google account activation lock with UART cable:
  1. Phone must be powered off
  2. Connect the phone to UART cable.
  3. Select correct COM port in port settings.
  4. Press 'Reset FRP UFS' and follow the instructions in program.

Operation: Unlock
Selected model: SM-G928T
Software version: 38.2

Waiting ADB device... OK
Reading phone info...
Model: SM-G928T
Android version: 7.0
PDA version: G928TUVS5ERA1
CSC version: G928TTMB5ERA1
Phone version: G928TUVS5ERA1
Product code: SM2G928TZDATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R58G*********
IMEI: 35256**********
HW version: REV1.0
RF cal date: 20151107
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2018-01-01
Boot Warranty bit: 1
SIM State: NOT_READY
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID:  C8 A4 9E 74 B6 06 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.38.2

No comments:

Post a Comment