Samsung Galaxy S7 Edge SM-G935F Network Unlock Succcessfully with z3x box



  UNLOCK INSTRUCTIONS:
    To unlock NEW security type:
    Phone must be rooted!
  If the software can't root the phone automatically,
  then you must root your device manually.
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock' button and select 'New Unlock' for direct unlock.
 
    To unlock OLD security type:
  1. Power on the phone.
  2. Connect the phone to PC with USB cable.
  3. Check Samsung modem in device manager, install drivers if needed.
  4. Press 'Unlock' button and select 'Unlock' for direct unlock.
 
    To read security codes (all security types):
  1. Power on the phone.
  2. Connect the phone to PC with USB cable.
  3. Check Samsung modem in device manager, install drivers if needed.
  4. Press 'Read codes' button to read security codes.
 
    To read security codes via diagnostic port:
    Warning! Knox warranty must be active (0x00)!
    If you have it voided (0x01(void)), then you can't use this function.
  1. Power on the phone.
  2. Type *#0808# and select 'DM+MODEM+ADB'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Press 'Read Codes DIAG' button to read security codes.
 
    To read security codes using sever:
    1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, select 'Read codes ...' algo,
     write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)
 
    To reset Google account activation lock:
  1. ADB must be activated in any way (you can flash sBoot from combination firmware,
     make sure, that you are not upgrade sBoot).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Select device in ADB settings.
  4. Press 'Reset FRP' to deactivate Google account activation lock.
 
   To reset Google account activation or Samsung reactivation lock:
  1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
    (Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)
   
    To reset Google account activation lock with UART cable:
  1. Phone must be powered off
  2. Connect the phone to UART cable.
  3. Select correct COM port in port settings.
  4. Press 'Reset FRP UFS' and follow the instructions in program.

Operation: Read Codes
Selected model: SM-G935F
Selected port: COM35 SAMSUNG Mobile USB Serial Port
Software version: 39.4

Checking hash file... OK
Searching Samsung modem... detected COM34
Reading phone info...
Model: SM-G935F
AP version: G935FXXS3ERKE
CSC version: G935FEVR3ERK3
CP version: G935FXXU3ARI1
Product code: EVR
Phone SN: RF8J*******
IMEI: 35561208*******
Unique number: CE01171158AF202B05
Searching Samsung diag port... detected COM35
Reading phone info... OK
CP version: G935FXXU3ARI1
CP build: Sep  4 2018 11:20:33
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON335
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:07)
Freeze code: 35263057
NET lock: 28097531
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.39.4

No comments:

Post a Comment